PEEK CF30 Data Sheet
download PDF

PEEK CF30 Rods, Plates & Tubular Bars

Quantum Polymer stocks large inventory of 30% Carbon Fiber resinforced PEEK (CF30) extruded Rods and Plates. Rods are available from 1/2" to 8" diameter and Plates/Sheets from 3/8" to 4" thickness. Our extrusion process optimized for High Performance polymer processing along with our propreiatary annealing technique results in a very high quality porosity free and stress free material.

 

PEEK CF30, 30% Carbon Fiber reinforced PEEK improves the compressive strength, stiffnessand load carrying capacity of PEEK,. It enhances load carrying capacity . This material provides significantly higher thermal conductivity than unreinforced PEEK and as a result and reduces its thermal expansion rate. It offers the highest chemical resistance of any semi-crystalline plastic with excellent retention of mechanical properties up to 570°F (300°C). PEEK offers a combination of superlative properties that allow it to replace metal in some of the most severe end-use environments.

 

Key Features
  • Exceptional chemical resistance to organics, acids and bases
  • High mechanical strength in excess of 250°C (482°F)
  • Very good wear and abrasion resistance
  • Low CLTE and high limiting PV properties
  • Best-in class fatigue resistance
  • Excellent dimensional stability
  • Excellent resistance to hydrolysis in boiling water and superheated steam
  • Superior dielectric with low loss at high temperatures and frequencies
  • Ease of processing
  • High purity
Typical Applications
  • Aircraft Hardware and fasteners
  • Aircraft mechanical components
  • Oil and gas processing equipment
  • Bearing retainers
  • Gears
  • Bushings
  • Seals
  • Thrust washers


Conforms To:
  • MIL-P-46183 Type III, Class 2
  • PEEK CF30 Size Chart
    DIA/THK ROD PLATE 12x48
    3/8
    NA
    S
    1/2
    S
    S
    5/8
    C
    C
    3/4
    S
    S
    7/8
    C
    C
    1
    S
    S
    1 1/4
    S
    C
    1 3/8
    C
    C
    1 1/2
    S
    S
    1 5/8
    C
    C
    1 3/4
    S
    S
    2
    S
    S
    2 1/4
    S
    C
    2 1/2
    S
    S
    2 3/4
    S
    C
    3
    S
    S
    3 1/4
    C
    C
    3 1/2
    S
    C
    3 3/4
    C
    C
    4
    S
    S
    4 1/2
    C
    NA
    5
    S
    NA
    5 1/2
    C
    NA
    6
    S
    NA
    8
    S
    NA

    S : Stocked Item
    C: Custom Manufactured Item

We only use 100% prime virgin PEEK resin purchased directly from resin manufacturers. All of our products accompany resin lot number and batch number for full traceability. Our products are proudly manufactured in the USA. This is the Quantum Way.......